Valor Remote Control - valorplus
Article

Adjusting Flame Heights


Valor Fireplaces - On and Off Example
Adjusting Flame Heights to Low & High Using your Valor remote control simply press the large flame button to turn your fireplace to high. To set your fire to low, press the small flame button until the desired flame height is met. If you are using the Valor wall switch, simply use the UP & DOWN buttons to adjust your flame height until you find the perfect balance.
Turning Down to Pilot Using the remote, hold the small flame button until the flame goes out. For the Valor wall switch press the DOWN button. Your pilot light will remain on and allow you to easily start up your fireplace at a later date. Learn more about controlling your Valor gas fireplace for more information on remote controls, fireplace control and more, click the links below:

4 Replies to Adjusting Flame Heights

  1. My fireplace flame height will not adjust. The signal is received from the handset, and it makes the sound as though it is adjusting the height and operating normally, but there is no change in the flame height. Something seems like it is stuck. The manual doesn’t offer any troubleshooting tips. Please help.

  2. I have a new L1 installed recently. The flames are blue with just a hint of orange. The blog and catalog pictures show orange flames. Does this mean the fireplace needs adjusting? I’ve set flame height to Hi, however the flames are still almost entirely blue. Thank you.

Leave a Reply

Your email address will not be published. Required fields are marked *

Discover more from Valor Fireplaces Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading